FAQ

Under the various Warranty Plans, this Agreement provides repair to restore operational use of your Protected Lines or Protected Systems that experience a Leak or Failure. The contractor will ensure compliance with applicable building codes at the time of repair. After the Protected Line or Protected System is repaired, the contractor will provide basic site cleanup to the affected area.

• Any costs or expenses that we reasonably determine as unnecessary to repair or replace a Leak or Failure.
• Any parts or materials not protected under the terms of the Plan.
• Any parts or materials we reasonably determine to be unnecessary to repair or replace a Leak or Failure.
• Leaks and Failures which first occurred before the Effective Date of your Warranty Plan(s).
• Nonstandard parts and materials.
• Cosmetic finish work (e.g., paint, wallpaper) or restoration of the affected area (e.g., sheetrock, tile, landscaping).
• Meters or movement of any meter at the time of a Leak or Failure, unless required by the applicable building code.
• Any insurable event.
• Leaks and Failures caused by insurable events.
• Damage to property caused by any Leak or Failure including, but not limited to, mold.
• Line or system problems caused by you or a third-party through such things as abuse, neglect, or other abnormal conditions of use.
• Lines located inside a concrete slab.
• Lines which exit your home and extend to pools, pool heaters, outside lighting, appliances, or other structures, unless expressly defined in this Agreement.
• Updates or upgrades that are not related to a current Leak or Failure.
• Septic tanks, leach fields, or the lines that exit those systems.
• Storm sewers.
• Sump pumps.
• Appliances and connections to appliances, unless expressly defined in this Agreement.
• Low pressure or clogs due to corrosion or any obstruction inside of a line.
• Asbestos coverings in any form.
• Mold and/or mildew evaluation, remediation, prevention or other related services.

Leaks and Failures where any hazardous substance or material exists, such as asbestos coverings in any form, mold or mildew.

• No protection is available under the Agreement until after any and all hazardous materials and substances have been removed, and the work area has been deemed safe.
• It is your sole responsibility to clear the work area of all hazardous materials and substances.
• After the work area has been cleared of all hazardous materials and substances and then deemed safe by us, the Agreement will apply subject to the same terms and conditions as if no hazardous materials or substances had been previously present providing your Protection is still in effect under this Agreement at the time it is safe to perform service.

We will only pay up to the limits set forth in each Warranty Plan’s Limit of Protection, as set forth on your Schedule Page, for each claim. For a Protected Line, two or more claims within 90 days of each other will be considered the same claim for the purpose of calculating the Limit of Protection. For a Protected System, two or more claims within 365 days of each other will be considered the same claim for the purpose of calculating the Limit of Protection. See Plan Options below for more specific coverage information.

After 180 days of continuous enrollment, if you have a claim on a Protected System and it is deemed by our contractor that repair is not possible due to a part or parts being un­available or obsolete, we will provide you with credit equal to the average cost of such repair had the repair been possible, to be applied toward replacement of your system, provided you utilize our contractor to replace your system at the time of your claim.

For Warranty Plans you enroll in and pay for directly through us, the Effective Date of protection will be 15 days after your enrollment is processed, provided you have paid for protection to begin. For the Warranty Plans you enroll in and pay for through your utility company, the Effective Date of protection will be 15 days after your enrollment is processed and we receive acceptance from your utility company of UtilityShield charges being successfully included on your utility account. Regardless of payment method, your protection will only continue so long as you remain current on your payments. If your Warranty Plans are cancelled at any time, you may re-enroll, and you will obtain a new Effective Date.

After your “Free Look” period, you may cancel this Agreement by mailing a request for cancellation to The Manchester Group, P.O. Box 9052, Dublin, Ohio 43017, and your cancellation will be effective at the end of the monthly period during which you cancelled. Also, we may cancel this Agreement for any reason if we provide written notice to you at least 30 days before the cancellation becomes effective. We will refund any pre-paid protection that remains when your cancellation becomes effective, less the amount of any claims paid.

This Warranty Plan covers the cost for repair or replacement necessary to remedy a leak in your Inside Gas Lines, up to $2,000.

This Warranty Plan covers the cost for repair or replacement necessary to remedy a leak in your Inside Sewer Lines, up to $2,000.

This Warranty Plan covers the cost for repair or replacement necessary to remedy a leak in your Inside Water Lines, up to $2,000.

This Warranty Plan covers the cost for repair or replacement necessary to remedy a failure of your Outside Electric Line, up to $3,000.

This Warranty Plan covers the cost for repair or replacement necessary to remedy a leak in your Outside Buried House Line up to $2,000.

This Warranty Plan covers the cost for repair or replacement necessary to remedy a leak in your Outside Gas Line up to $3,000.

This Warranty Plan covers the cost for repair or replacement necessary to remedy a leak in your Outside Water Line, up to $8,000. If the covered repair or replacement requires sidewalk repair, then this warranty plan provides a separate limit of protection of up to $500 to apply solely to the sidewalk repair. This additional limit of protection for sidewalk repair cannot be combined with sidewalk repair under the Outside Sewer Line Protection Plan.

This Warranty Plan covers the cost for repair or replacement necessary to remedy a leak in your Outside Water line, up to $4,500. If the covered repair or replacement requires sidewalk repair, then this Warranty Plan provides a separate limit of protection of up to $500 to apply solely to the sidewalk repair. This additional limit of protection for sidewalk repair cannot be combined with sidewalk repair under the Outside Sewer Line Protection Plan.

This Warranty Plan covers the cost of repair necessary to remedy a Failure of your Furnace or Boiler, including costs for the following standard parts: bearings, capacitor, circuit board, drain line and trap, couplers, internal draft inducer, pilot/primary ignition control, sensor, wiring, fan control, fan assist motor and assembly, flame sensor switch, fuses (excluding circuit breakers), gas cock, gas valve located on the Furnace or Boiler, limit controls, standing pilot and safety assembly, pilot tubing, pilot assembly, pressure regulator (air/gas), switches (emergency, firomatic), thermocouple, transformer, non-programmable thermostats, standard programmable thermostats, and Approved Smart Thermostats (see Thermostats for Furnace, Air Conditioner, and Heat Pump Protection Plans). Additional standard parts for a Furnace include: the blower assembly, blower motor, blower pulleys, fans, fan belt, fan controls, and operating relays. Ad­ditional standard parts for a Boiler include: air scoops, aquastat, auto water fill valve, back flow preventer, balancing valves, burners (if available), circulator (up to 3 zones), drain-off valves, expansion tank, draining expansion tank, flow check valve, low water cutoff, pressure gauges, purge valves, relays, relief valve (30 lb. pop), vent dampers and vent valves (at Boiler), and zone valves and operator (maximum 3 zones).

This Warranty Plan covers the cost of repair necessary to remedy a Failure of your central Air Conditioner, including costs for the following standard parts: bearings, belts/pulleys, capacitors, circuit boards, condenser motor/fans, contactor switches, delay timers, fan belt, fan controls, fan relays, fuses (internal), limit controls, motors, line set, operating relays, schrader valves, service valves, shafts, trans­formers, non-programmable thermostats, standard programmable thermostats, and Approved Smart Ther­mostats (see Thermostats for Furnace, Air Conditioner, and Heat Pump Protection Plans).

This Warranty Plan covers the cost of repair necessary to remedy a failure of your Heat Pump, including costs for the following standard parts: defrost control, defrost sensors, contactor, high-pressure and low-pressure switches and all parts under the Central Air Conditioner Protection Plan, up to $2,000.

This Warranty Plan covers the cost of repair necessary to remedy a Failure of your residential Water Heater, including costs for the following standard parts: gas valve located on the heater, induced draft motors, ignition controls, safety controls, regulators, main burners, pilot assemblies, tubing, thermocou­ples, T&P relief valves, electric heating elements, and basic thermostats.

This Warranty Plan includes the entirety of the Outside Sewer Line Protection Plan, plus the cost for repair or replacement to remedy a failure of your Grinder Pump Station. Grinder Pump Station protection may not be purchased separately, and can only be combined with Outside Sewer Line protection. When combined with Grinder Pump Station protection your Outside Sewer Line may be a low pressure line, per the requirements of the residential grinder pump station. Neither the Grinder Pump Station nor the Outside Sewer Line Protection Plans provide any protection to the utility owned valve pit and sewer main line.

ADDITIONAL BENEFITS FOR FURNACE, AIR CONDITIONER, AND HEAT PUMP PROTECTION PLANS

At any time, you may choose to replace your otherwise repairable system instead of having repairs performed. If you choose to replace rather than repair your repairable system, we will provide you with credit equal to either the average cost of such repair had the repair been performed, or the value of the Protected System, whichever is less, to be applied toward replacement of your system, provided you utilize our contractor to replace your system at the time of your claim.

After 180 days of continuous enrollment, if you have a claim on a Protected System and it is deemed by our contractor that repair is not possible due to a part or parts being un­available or obsolete, we will provide you with credit equal to the average cost of such repair had the repair been possible, to be applied toward replacement of your system, provided you utilize our contractor to replace your system at the time of your claim.

ADDITIONAL BENEFITS FOR WATER HEATER PROTECTION PLANS

At any time, you may choose to replace your otherwise repairable residential Water Heater instead of having repairs performed. If you choose to replace rather than repair your repairable Water Heater, we will provide you with credit equal to the estimated cost of the repair that may be applied toward its replacement, provided you utilize our contractor to replace your Water Heater at the time of the claim.

Water Heater Leaks are excluded during the first 180 days (see Additional Exclusions for the Water Heater Protection Plan). After 180 days of continuous enrollment, the Water Heater Protection Plan also covers the cost of repair necessary to remedy Water Heater Leaks. This protection includes the coupling attached to your Water Heater. Leaks occurring at or before the shut off valve (or more than 12 inches from your Water Heater) may be protected by our Inside Water Line Protection Plan.

If Your Water Heater Cannot be Repaired: 1) After 180 days of continuous enrollment, if our contractor deems that your Water Heater cannot be repaired because a necessary part is unavailable or obsolete, we will provide you with either the minimum credit described in this section or with credit equal to the average cost of such repair had the repair been possible to be applied toward replacement of your Water Heater, whichever is greater, provided you utilize our contractor to replace your Water Heater at the time of your claim; 2) After 180 days of continuous enrollment, if your Water Heater cannot be repaired due to a rupture, we will provide you with either the minimum credit described in this section or with credit equal to the value of your Water Heater prior to rupture, whichever is greater, to be applied toward replacement of your Water Heater, provided you utilize our contractor to replace your Water Heater at the time of your claim.

Minimum Credit: In the event your Water Heater cannot be repaired either because of an obsolete or unavailable part, or because of a protected rupture, we will provide you with a credit of at least $250 regardless of the estimated cost of repair or the value of your ruptured Water Heater prior to rupture.

THERMOSTATS FOR FURNACE, AIR CONDITIONER, AND HEAT PUMP PROTECTION PLANS

Standard Programmable Thermostats: A standard programmable thermostat means a thermostat that enables the set programing of up to four unique temperatures per day at certain times. A standard programmable thermostat does not include a smart thermo­stat, which enables remote monitoring, adjustment, or system control, except Approved Smart Thermostats.

Approved Smart Thermostats: Approved Smart Thermostats are protected when you enroll in full system protection (HVAC + Water Heater). We approve all Smart Thermo­stats not exceeding a value of $250.00.

All Manchester Group, LLC, a division of IGS Energy, Protected Lines and Protected Systems must be attached to or located in a Single Family home owned by you, and for outside line protection, you must own the land upon which your Single Family home is located. All Protected Lines and Protected Systems must have been installed by a licensed contractor according to the applicable building code, and they must be in use and in good working order, without any Leaks or Failures, when you enroll. It is solely your responsibility to have or obtain any right-of-way needed by the contractor(s) to repair or replace any Protected Lines. If you have multiple systems of the same type, each system must be enrolled to receive protection under this Agreement. We reserve the right to confirm eligibility while processing any claim.

Additional Exclusions for the Inside Electric Line and Outside Electric Line Protection Plans:

• Households with an electrical service entrance rated 400 amps or above.
• Replacement of switches, dimmers, and outlets in colors other than white or beige.
• Solar systems and components, and electronic or computerized system management controllers.
• Resetting of circuit breakers and replacement of fuses.
• The addition of new switches, dimmers, outlets, and additional service connections.

Additional Exclusions for the Outside Gas Line and Outside Buried House Line Protection Plans:

• High pressure gas lines.

Additional Exclusions for the Inside Water and Inside Sewer Line Protection Plans:

• Plumbing fixtures, including connections to plumbing fixtures.
• Leaks caused by freezing due to neglect such as your home not being adequately heated or having items connected to outside bibs which caused line breakage or Leaks.

Additional Exclusions for the Inside Sewer Line and Outside Sewer Line Protection Plans:

• Drain-jet, rod, or auger service to clear blockages in non-leaking lines.

NOTE: Any removal of roots from a line prior to your enrollment, or any Leak occurring where roots are present within 180 days from your enrollment date, is deemed a pre-existing condition and will make the line ineligible for protection.

Additional Exclusions for the Outside Water Line Protection Plan:

• Components of a well, such as the well, well cap, well seal, well pump, pressure tank, and storage tank.
• Branch lines.
• Issues with a well, such as re-digging the well, movement of the well, and electric lines to well components.

Additional Exclusions for the Furnace Protection Plan:

• A furnace or boiler rated at 400,000 BTU/hour or more, space heaters, and fuel oil heating systems.
• Bleeding air bound systems, draining and refilling of Boiler, and balancing any system.
• Components used to cool air including air conditioners and related coils and controls, dual-fuel burners, fan coils, and other auxiliary heating, flue restrictors, heating jacket, line circuit breakers, trim insulations and boiler sections (leaking or not).
• Heat exchangers.

Additional Exclusions for the Air Conditioner Protection Plan:

• Any system exceeding five tons capacity, geothermal heat pumps, and natural gas powered cooling equipment.
• Balancing of system and refrigerant replacement. Circuit breakers, compressors, condenser and evaporator coils, thermostatic expansion valve (TXV), and solenoid valves.

Additional Exclusions for the Heat Pump Protection Plan (Includes Additional Exclusions for the Furnace Protection Plan and Additional Exclusions for the Air Conditioner Protection Plan):

• A Heat Pump rated at 400,000 BTU/hour or more, any system exceeding five tons capacity, geothermal heat pumps, and natural gas powered cooling equipment.
• Reversing valves.

Additional Exclusions for the Water Heater Protection Plan:

• Tankless water heaters, any unit used for nonstandard purposes including, but not limited to, space heating or pool heating.
• Repairing Leaks (including water tank ruptures) within the first 180 days of Protection.
• Flushing.
• Anode rods and drain valve.

Additional Exclusions for all System Protection Plans

• Any rooftop, through-the-wall, or hanging furnace, boiler, air conditioner, heat pump, or water heater units.
• Maintenance, including inspections and seasonal turn-on/off or pilot relights.
• Utility lines (piping) including water, gas, and electric lines.
• Chimney maintenance or repairs.
• Non-standard parts and unavailable parts.
• Non-standard thermostats, including non-standard programmable thermostats and energy saving thermostats, except Approved Smart Thermostats.
• Parts/service covered by a manufacturer’s warranty.
• Auxiliary equipment such as air filters, air zoning electronics and components, electronic air cleaners, humidifiers, and air temperature controls.
• System replacement, unless expressly defined in this Agreement.
• Any lines or ducts attached to a system including, but not limited to, air ducts and vents, supply and return lines, radiators, and registers.
• Combination ambient heat/domestic hot water heating units, fuel oil heating systems, and propane heating systems.

Term. The term of this Agreement is the period of time for which you have purchased protection and is either an annual period of 365 days or a monthly period of 30 days. This Agreement is a service contract and not an insurance policy.

Transferability. You may not assign or otherwise transfer this Agreement to another party. We reserve the right to assign or otherwise transfer this Agreement or our rights or obligations under this Agreement to another party at our sole discretion.

Changes to this Agreement. We will provide you with written notice at least 30 days before we modify this Agreement. If we change the fee for any Warranty Plan, such change will not take effect until the expiration of any periods for which you pre-paid.

No Waiver. If we choose not to enforce any provision of this Agreement, that will not constitute a waiver of our rights in any future situation.

Right to Recover from Third Parties. If we pay for service in response to your claim, you must assign to us your right to recover that cost from third parties.

Concealment or Fraud. You understand and agree that if you; (1) make any false statement, (2) submit a fraudulent claim, or (3) intentionally conceal or misrepresent a fact or circumstance, then you will waive your right to service for all claims (fraudulent and non-fraudulent) under this Agreement.

Choice of Law. This Agreement will be interpreted and construed under the laws of the State of Ohio. Independent Terms and Conditions. If any part of this Agreement is held invalid by a court, there will be no effect on any other parts, which will remain in full force and effect.

Entire Agreement. This Agreement, together with your Schedule Page, is the entire agreement and understanding between you and us, and it supersedes all other written and oral agreements between you and us.

Definitions

“Air Conditioner” means a single, standard residential, whole house cooling unit that extracts heat from your home.

“Failure(s),” with respect to a System Protection Plan, means that your Furnace or Boiler, Air Conditioner, Heat Pump, or Water Heater is not operating properly due to normal wear and tear.

“Failure(s),” with respect to a Line Protection Plan, means that an electric line is not operating due to normal wear and tear or inherent defects in material or craftsmanship.

“Failure(s)” with respect to a Grinder Pump Station means that the Grinder Pump Station is not operating properly due to normal wear and tear.

“Failure(s)” with respect to an Electric Line Protection Plan, means that a protected line is not operating due to normal wear and tear or inherent defects in material or craftsmanship.

“Furnace or Boiler” means a single, standard residential, whole house propane, natural gas, or electric heating unit located within your home.

“Heat Pump” means a single, standard residential, whole house heating and cooling unit that uses compression and decompression to heat and/or cool. The Heat Pump includes a single attached backup furnace.

“Grinder Pump Station” means a standard, single residential grinder pump station such as the E/One Model DH071-93 Grinder Pump System, or a similar standard, single residential Grinder Pump System, that was installed by a licensed installer, that collects and conveys raw sewage to the low pressure sewage line to the utility owned valve pit and sewer main line. If you have multiple sewer lines and Grinder Pump Stations exiting your home, the Grinder Pump Station protected by the Plan will be the Grinder Pump Station connected to the first line upon which you make a claim, and that same Grinder Pump Station will remain the only Grinder Pump Station protected under the Grinder Pump Station and Outside Sewer Line Protection Plan.

“Inside Electric Line” means an electric supply system from the main breaker panel located within the home to the switches, outlets, and connection boxes located within the home. The Inside Electric Line also includes connections to your Protected System.

“Inside Gas Line” means a natural gas or propane plumbing supply line system from the point of entrance into your home to the shut-off valve (or where code requires a shut-off valve) at each natural gas or propane appliance located within the home. The Inside Gas Line also includes connections to your Protected System and the single supply line (up to 24 inches in length), from your natural gas meter located at the house to where the line enters the house. The Inside Gas Line does not include any other lines exiting or entering the home.

“Inside Sewer Line” means a sewer drain line system located within your home that collects and conveys raw sewage and wastewater from individual house drains to the Outside Sewer Line. The Inside Sewer Line does not include any connections or extensions located outside the walls or above the floors to plumbing fixtures such as exposed traps, drains, or toilets. In addition, Inside Sewer Line does not include traps located within a wall or under a floor such as tub and shower drain traps.

“Inside Water Line” means a water plumbing supply line system from the point of entrance into your home to the shut-off valve (or a maximum of six inches of exposed line where the waterline extends from a wall or floor) at each appliance or fixture located within your home. The Inside Water Line also includes connections to your Protected System. The Inside Water Line does not include any other extensions or connections such as lines to appliances or fixtures, any lines used for inside sprinkler systems, or any lines exiting your home.

“Leak(s)” means a break, tear, or rupture of a protected line which occurs as a result of normal wear and tear or inherent defects in material or craftsmanship. (See also “Water Heater Leak(s))

“Outside Buried House Line” means a single natural gas supply line over 24 inches in length from the outlet of the meter to the exterior of the foundation of the home. The Outside Buried House Line is a single line and is the most direct line between the meter and the home. It does not include any connections or extensions such as lines to pool heaters or gas lights.

“Outside Electric Line” means a single service of overhead/ underground customer service electric lines and components that connect your home to the utility owned service lines. Outside Electric Line includes the weatherhead, conduit, meter base, service entrance cable and ground wire/rod.

“Outside Gas Line” means a single natural gas supply line from the curb box to the inlet valve of the meter located at the home. If the meter is located in the yard, the Outside Gas Line includes the natural gas line from the outlet of the meter to the exterior of the foundation of the home. The Outside Gas Line is a single line and is the most direct line between the curb box and the home. It does not include any connections or extensions such as lines to pool heaters or gas lights.

“Outside Sewer Line” means a single sewage drain line located outside your home that collects and conveys raw sewage from individual house drains out to the utility owned sewer main line or septic tank. If you have multiple sewer lines exiting your home, the Outside Sewer Line will be the first line upon which you make a claim, and that same line will remain the only Outside Sewer Line protected under the Outside Sewer Line Protection Plan.

“Outside Water Line” means a single water supply line from the curb box to the inlet valve of the meter located inside your home. If the meter is located outside your home, the Outside Water Line includes the water line from the outlet of the meter to the exterior of the foundation of your home. Outside Water Line does include an outside water supply line connected to a well. The Outside Water Line is a single line and is the most direct line between the curb box and your home or the well and your home. It does not include any connections or extensions such as water lines to sprinklers or agricultural meters.

“Protected Line(s)” means an eligible utility line that you enrolled in a Protection Plan and for which your Protection Plan payments are current.

“Protected System(s)” means an eligible Furnace or Boiler, Air Conditioner, Heat Pump, or Water Heater that you enrolled in a Protection Plan and for which your Protection Plan payments are current.

“Schedule Page” means the letter you received with this Agreement which states your name, address, building type, what lines and/or systems you enrolled in a Protection Plan, and the applicable Limits of Protection for each Protected Line and/or Protected System you have enrolled.

“Single Family” means a housing unit owned by you that is a single detached home, duplex, triplex, quad, condominium, or row home. If you own a duplex, triplex, or quad building, all lines attached to and in the building must be enrolled in UtilityShield. If you only own a single unit within a duplex, triplex, or quad, or if you share a line in any way with another party, we will prorate any claim payment based on the portion of the line you own. For example, if you share a line with one other party and have a covered claim we will pay 50% of the cost for repair up to the applicable Limit(s) of Protection.

“Sidewalk Repair” means the cutting, excavation, and repair of a public sidewalk.

“Street Cutting” means the cutting, excavation, and repair of a public street.

“Water Heater” means a single, standard residential, whole house propane, natural gas, or electric appliance that heats and stores water.

“Water Heater Leak(s)” means Leaks that occur inside your Water Heater (including a water tank rupture), or between your Water Heater and the shut-off valve (up to a maximum of 12 inches).

In order to start and maintain protection, all charges for the Warranty Plans in which you enroll must be paid in full and on time according to your invoices. If you do not pay any amounts owed to us within 30 days of the date payment is due, this Agreement will automatically cancel for non-payment, and your lines and systems will not be protected.

You have a “Free Look” period of 30 days from the date of your enrollment to review this Agreement without obligation. During the “Free Look” period you may cancel this Agreement and receive a full refund of any payment we have received so long as you have not made a claim.

If we deny your claim based on an initial assessment, you may still request that we dispatch a contractor to your home; if that contractor confirms that you do not have a Leak or Failure covered under this Agreement, you will be responsible for the cost of the service call, as well as the cost of all repairs. You will be billed directly for the service call. If we deny your claim based on an initial assessment, you may contact your own contractor to perform services at your home. If your contractor determines that you do have a Leak or Failure that should be covered under this Agreement, you must call us immediately to resubmit the claim in order to receive any service under this Agreement. Unless you call us immediately and resubmit the claim, we will not be responsible for the cost of the service call or repair. This Agreement does not provide protection for clogged or non-working Inside or Outside Water or Sewer Lines that are not Leaking. We will facilitate the use of our contractor network to provide you with an unclogging service for the lines you have protected under this Agreement, but the service call and fee for unclogging are your responsibility, and you will be billed directly for the unclogging service. You will be billed directly for any services received that are not covered under this Agreement. You will have up to 60 days from the date on the invoice to make payment. Until the invoice is paid, no additional claims will be eligible to be processed. And if the invoice is not paid on time, your Warranty Plans may be cancelled without notice.

You must follow the following claims procedures to receive any service under this Agreement.

Step One

If you have or suspect a Leak or Failure involving your Protected Lines, please call your local utility company. [If you suspect any natural gas leak, please leave your home immediately and contact your local gas company.] The utility company’s representative may provide temporary service and give you a deadline for repair, or if there is a severe issue, may turn off your service for safety reasons.

Step Two

If you have a Leak or Failure involving your Protected Lines or Protected Systems, you must contact us immediately to receive service under this Agreement. You can call us 24 hours a day at 844-296-7764 to report a claim. If your call is received between 8:00 am – 6:00 pm Eastern Time, Monday through Friday (excluding holidays), we will arrange to have an approved, independent contractor contact you as soon as possible, or by no later than 6:00 pm the next business day to arrange for repair. If you have an Emergency claim (where you have no service on the Protected Line or Protected System) outside of the hours listed above, you can call us, and our after-hours claim representative will explain the Emergency service process to you at the time of your claim. A $75 fee may apply for Emergency Service.

Step Three

If the cost of repair exceeds the Limit of Protection for a Warranty Plan, or if you request work that is not covered by this Agreement, the contractor will inform you of those charges before work is performed. You must arrange for your payment of the additional charges to the contractor before any work begins. You must assist us and the contractor with obtaining a permit for any repair or replacement, if required.

Step Four

After the repair or replacement has been completed, it may be your responsibility to contact your utility company in order to restore service to your home. We will pay for up to two hours of the time a contractor must wait after the completion of the repair for your utility company to restore service. If your local utility company does not require a pre-service inspection, the contractor will restore service.

When you submit a claim, we’ll select a contractor local to your area to complete your repair in a professional and timely manner. This saves you the time and effort of finding and securing a qualified, reliable contractor.

Every contractor performing work on behalf of UtilityShield goes through an intensive interview and selection process to ensure they are highly-skilled, certified professionals, and will provide exceptional customer service.

To deliver the best customer experience, we choose a contractor local to your area to service your claim, and consistently monitor the performance of our contractors through our customer satisfaction survey program.

Click here to fill out the claim form. Please call us at 844-296-7764 with any questions.